SignaLink Jumper Settings & Cable Wiring Diagram
For HTs with a Separate Mic & PTT Lines

NOTE:  The diagram shown below is for a typical HT with separate Mic and PTT lines.  Your radio may require different connections from those shown.  Check your radio manual before installing the jumpers or building your radio cable, and be sure to read "IMPORTANT NOTES" below!



  • Be sure to use a STEREO connector if required by your radio!

  • The wire color code shown is for our un-terminated radio cable p/n "SLCABNC".


Tigertronics - All Rights Reserved  |  BayPac, SignaLink, and TigerTrak are trademarks of Tigertronics
APRS is a trademark of Bob Bruninga  |  All other trademarks are the property of their respective owners