
 
 
 
 
 ĿĿ  ĿĿĿ Ŀ Ŀ Ŀ Ŀ  Ŀ
   ڿ  Ŀ ٳ   Ŀ   Ŀ   Ŀ   ڿڿ 
                 Ŀ                 ٳ  
                     Ŀ     Ŀ           
             Ŀ                 
                  



Wijckel, Mei 1999


                   Second part is english language.



De allsound versie van Intercom werkt niet bij alle geluidskaarten perfect.
De manier waarmee Intercom de kaart aanstuurt is ingegeven door de
noodzaak met niet-standaard frequenties te sampelen.
Niet elke geluidskaart doet dit goed.

Enkele tips:
Zorg ervoor dat bij software configureerbare geluidskaarten de driver
die de kaart initialiseert geladen wordt.
Vooral als U bij Uw PC van operating systeem kunt wisselen, 
zoals Windows 9x / DOS, wordt dit gemakkelijk over het hoofd gezien.
Het effect is dan dat Intercom geen kaart ziet of dat bij het
aansturen door Intercom geen juiste reactie door de kaart plaatsvindt.

Er zijn inmiddels PC's op de markt waarvan de hardware alleen door
een windows driver is te activeren. Bij het starten met DOS is dan
sommige hardware niet te bedienen, het lijkt alsof het gewoon niet
aanwezig is. Deze PC's zijn niet compatible met de standaard, door
IBM gezet en worden niet ondersteund. Pech gehad, weggegooid geld.


Bij sommige kaarten kan het voorkomen dat -ondanks dat diverse ingangen
aanwezig zijn- niet van ingang is om te schakelen.
U bent dan waarschijnlijk veroordeeld tot het gebruiken 
van de microfoon ingang.


Geteste kaarten:

met Chipset Analog Devices AD1816: 
        Sampelen is goed.
        Ingangskeuze microfoon/line/cd
        Morse/FSK toon is goed.
        Start BPSK toon in 10% verkeerd.
        Herstarten van Intercom lost dus in 90% het probleem op.
        Conclusie: redelijk goed bruikbaar.

met Chipset OAK OTI601B: 
        Samplesnelheid te laag
        Ingangskeuze werkt niet 
        Morse/FSK toon is goed.
        BPSK niet exact 180 graden faseverschil.
        Conclusie: is bruikbaar.

Soundblaster 1.x
        Samplesnelheid te laag
        Ingangskeuze niet aanwezig
        Morse/FSK toon is goed.
        BPSK niet getest.

met ESS ES 1688 chipset (Laptop, JAZZ driver)
        Sampelen is goed.
        Ingangskeuze microfoon/line/cd
        Morse/FSK toon is goed.
        BPSK faseverschil te ver van 180 graden, slecht detecteerbaar.
        Conclusie: is bruikbaar, BPSK wordt afgeraden.

met ES 688 chipset (MEDIA FAMILY)
        Sampelen is goed.
        Ingangskeuze microfoon/line/cd
        Morse/FSK toon is goed.
        BPSK toon is goed
        Conclusie: lijkt een perfecte kaart te zijn.

met DT 0398 chipset (Onbekend chinees fabrikaat)
        Sampelen werkt niet in DOS.
        Ingangskeuze daardoor onbekend
        Morse/FSK toon is goed.
        BPSK toon is goed
        Conclusie: Het meegeleverde DOS programma activeert de kaart niet
                   volledig. Helaas voor deze verder prima kaart.

******************* EINDE NEDERLANDSE TEKST *********************************





The allsound version of Intercom is not working perfect with every soundcard.
The way Intercom uses the soundcard is needed because the sample-rate
is non-standard.
Not every soundcard can cope with this.

Some hints:
Make sure if you have a software-configurable soundcard to load the
driver which initializes the card.
Especially when you can change from operating system at your PC,
like Windows 9x / DOS one can easily forget this.
This can result in Intercom seeing no soundcard or the soundcard
giving no good response to the commands from Intercom.

At this moment there are PC's at the market of which the hardware
only can be activated by a Windows driver. If you start in DOS it
seems if the hardware simply is not present. These PC's are not
compatible with the standard, set by IBM and are not supported.
Bad luck, money gone.

With some cards it can happen -in spite of the presence of different
inputs- you can not change from input.
Then you probably are convicted to use the microfone input.



Tested Cards:

With Chipset Analog Devices AD1816: 
        Sampling is good.
        Choice of input microfone/line/cd
        Morse/FSK tone is good.
        Start BPSK tone in 10% wrong.
        Restarting Intercom therefore solves the problem in 90% of the cases.
        Conclusion: can be used reasonably good.

With Chipset OAK OTI601B: 
        Samplespeed too low.
        Choice of input does not work.
        Morse/FSK tone is good.
        BPSK not exact 180 degrees faseshift.
        Conclusion: can be used.

Soundblaster 1.x
        Samplespeed too low.
        Choice of input not present.
        Morse/FSK tone is good.
        BPSK not tested.

With ESS ES 1688 chipset (Laptop, JAZZ driver)
        Sampling is good.
        Choice of input microfone/line/cd
        Morse/FSK tone is good.
        BPSK faseshift too far from 180 degrees, badly detected
        Conclusion: can be used, BPSK is not recomended.

With ES 688 chipset (MEDIA FAMILY)
        Sampling is good.
        Choice of input microfone/line/cd
        Morse/FSK tone is good.
        BPSK tone is good.
        Conclusion: seems to be a perfect card.

With DT 0398 chipset (Unknown chinese origin)
        Sampling does not work in DOS.
        Choice of input therefore is unknown(and irrelevant)
        Morse/FSK tone is good.
        BPSK tone is good.
        Conclusion: The accompagnying DOS program did not activate the
                    card completely. Unfortunately, because it seemed to
                    be a good candidate.
